Specifications

Maintenance—Every 10 Hours or Daily
TX,60,JC280 –19–16MAY95–1/1
CHECK RECOVERY TANK COOLANT LEVEL
T8385AE –UN–15DEC94T6274AQ –UN–18OCT88
With the engine cold, coolant level must be between HOT
and COLD marks on the recovery tank.
If coolant is below the COLD mark, add coolant to the
recovery tank.
Ö
CAUTION: Prevent possible injury from hot
spraying water. DO NOT remove radiator filler
cap unless engine is cool. Then turn cap slowly
to the stop. Release all pressure before you
remove cap.
If recovery tank is empty, check for leaks. Repair as
required. Add coolant to the radiator and the recovery
tank.
Coolant level must be at bottom of the filler neck.
If recovery tank is full and radiator is low, check for leaks
in radiator cap and hose connections between radiator
and coolant recovery tank.
TX,60,DH2213 –19–16JUN93–1/3
CHECK HYDRAULIC OIL LEVEL
IMPORTANT: Prevent possible hydraulic pump
damage. DO NOT operate engine
without oil in the hydraulic reservoir.
1. Park machine on a level surface.
2. Lower equipment to the ground.
60–3
PN=124