Specifications

Maintenance—Every 10 Hours or Daily
TX,60,DH2214 –19–02OCT92–1/1
CHECK TRANSMISSION OIL LEVEL
T7773CP –UN–21AUG92
624G Shown
IMPORTANT: Prevent possible transmission damage.
DO NOT operate engine when
transmission oil level is low.
1. Before starting engine, check oil level on dipstick (A). If
oil is to upper mark when oil is cold, there is sufficient
oil to start the engine.
2. If necessary, add oil to filler tube. (See Fuels and
Lubricants chapter.)
3. Install dipstick.
4. Start engine.
5. Engage service brakes. Move clutch cut-off switch up,
to disengaged position.
6. Release park brake.
7. Move transmission control lever to 3rd speed forward
"F" position.
Operate engine at fast idle for 30 seconds. Reduce
engine speed to slow idle and place transmission
control lever in neutral "N", for 15 seconds.
Repeat this step until transmission oil reaches normal
operating temperature.
8. Move transmission control lever to neutral "N", and
engage neutral lock. Lower all equipment to ground.
9. Engage park brake.
10. Release service brakes.
11. Check oil level with engine at slow idle. Oil must be
between marks on dipstick.
60–5
PN=126