Specifications

Maintenance—Every 1000 Hours

TX,85,DH2477 –19–31JUL92–1/1

LUBRICATE REAR DRIVELINE

T7516BG –UN–11JUN91

One Point

CAUTION: Prevent possible injury from

unexpected machine movement. Install frame

locking bar before lubricating.

NOTE: To prevent plug loss, lubricate the machine when

it is fully articulated or half articulated and NOT in

the straight position.

Lubricate until grease escapes around vent holes in drive

shaft end. (See Fuels and Lubricants chapter.)

NOTE: Grease daily when operating in deep mud, water,

or snow.

TX,85,JC254 –19–29NOV94–1/1

CHECK ENGINE SPEEDS

1. Warm engine to normal operating temperature.

2. Connect a tachometer and check engine speeds.

SPECIFICATIONS

544G, LL, TC 624G 644G

SLOW IDLE 825—875 rpm 825—875 rpm 775—825 rpm

(S.N. -544523)

875—925 rpm

(S.N. 544524- )

FAST IDLE 2350—2400 2300—2350 2300—2350

rpm rpm rpm

If engine speeds need adjustment, check engine speed

linkage. If speeds still need adjusting, see your

authorized dealer.

85–1

PN=148