Specifications

Maintenance—Every 1000 Hours
TX,85,DH2229 –19–02OCT92–1/1
ADJUST ENGINE SPEED CONTROL LINKAGE
T7853AB –UN–06OCT92
A—Swivel B—Cable C—Lever D—Stop Screw
1. With accelerator pedal at slow idle, disconnect
swivel (A) on speed control cable (B) and adjust
until:
544G, LL, TC, and 624G: Injection pump lever (C)
has 2—4 mm (0.08—0.16 in.) of override at the
slow idle position. Connect cable to injection pump
lever.
644G: Hole in injection pump lever just lines up with
swivel at the slow idle position. Lengthen cable two
turns. Connect to injection pump lever.
2. Depress accelerator pedal until injection pump
lever is against fast idle stop and hold.
3. Adjust pedal stop screw (D) until it makes contact
with the pedal. Release pedal.
4. 544G, LL, TC, and 624G: Shorten pedal stop
screw until 2—4 mm (0.09—0.16 in.) override is
obtained at the pump.
644G: Tighten lock nut.
85–2
PN=149