Specifications

Maintenance—Every 1000 Hours
TX,85,JC1057 –19–24JAN96–1/4
CHANGE TRANSMISSION OIL AND
REPLACE FILTER
1. Operate machine under load until transmission oil
reaches normal operating temperature.
2. Park machine on a level surface.
3. Lower bucket to ground.
4. Move transmission control lever to neutral "N".
Engage neutral lock.
Ö
CAUTION: Prevent possible injury from
unexpected machine movement. Never rely on
transmission control lever alone to keep
machine from moving. Machine can
unexpectedly roll or move under power,
resulting in death or serious injury. Always
engage park brake to hold machine.
5. Engage park brake.
Ö
CAUTION: Prevent possible injury from
unexpected machine movement. Install frame
locking bar before changing oil.
6. Install frame locking bar.
IMPORTANT: Turbocharger may be damaged if
engine is not properly shut down.
7. Run engine at 1/2 speed for 2 minutes before stopping
to avoid damage to turbocharger. Release accelerator
pedal to slow idle.
8. Turn key switch to STOP. Let machine sit for
approximately 10 minutes.
85–5
PN=152