Specifications

Maintenance—Every 1000 Hours
TX,85,JC1141 –19–23MAY96–3/3
T100701 –UN–22MAR96
7. Remove screws and remove sheet metal cover from
brake. Loosen lock nut (A).
8. Loosen the 4 mounting capscrews that hold the park
brake to the mounting bracket.
9. Tighten adjustment screw (B) to 100 N•m (75 lb-ft).
10. Tighten the 4 mounting capscrews to 70 N•m (50 lb-
ft).
11. Back the adjustment screw off 180° (1/2 turn). (This
will give approximately 0.5 mm (.02 in.) pad to disk
clearance with park brake released and engine
running.)
12. While holding the adjustment screw in place, tighten
the lock nut.
13. Install sheet metal cover. Tighten cover screws.
85–9
PN=156