Specifications

Maintenance
T82,SKMA,A –19–28JUL94–1/1
DO NOT SERVICE INJECTION NOZZLES
IMPORTANT: Do not service or remove injection
nozzles. The service life of the injection
nozzles may be shortened by:
• Overheating
• Improper operation
• Poor quality fuel
• Excessive idling
If injection nozzles are not working correctly or are dirty,
the engine will not run normally. (See your authorized
dealer for service.)
TX,DH,236 –19–06JUN91–1/1
DO NOT ADJUST INJECTION PUMP
IMPORTANT: Never steam clean or pour cold
water on an injection pump while
the engine is running, or while
injection pump is still warm. To do
so may cause seizure of pump.
Clean trash regularly from injection
pump.
Adjusting the injection pump in any way not approved
by the manufacturer will end the warranty. (See your
copy of the John Deere warranty on this machine.)
Do not attempt to service an injection pump that is not
operating correctly. (See your authorized injection
pump service center.)
TX,90,DH2259 –19–12MAY93–1/2
CLEANING FUEL TANK OUTLET SCREEN
If fuel screen is plugged, debris must be removed and
screen cleaned.
90–5
PN=171