Specifications

Safety
TX,05,DH553 –19–18MAR91–1/1
USE HANDHOLDS AND STEPS
T6981AN –UN–15JUN89
Falling is one of the major causes of personal injury.
When you get on and off the machine, always maintain a
three point contact with the steps and handrails, and face
the machine. Do not use the steering wheel or any
controls as handholds.
Never jump on or off the machine. Never mount or
dismount a moving machine.
Be careful of slippery conditions on platforms, steps, and
handrails when leaving the machine.
TX,05,DH2281 –19–06OCT92–1/1
PREVENT MACHINE RUNAWAY
T6642EB –UN–20OCT88
Avoid possible injury or death from a runaway machine.
DO NOT start engine by shorting across starter terminals.
Machine will start in gear if normal circuitry is bypassed.
Never start engine while standing on ground. Start engine
only from operator’s seat with transmission control lever
locked in neutral and park brake engaged.
TX,05,JC1044 –19–12JAN96–1/1
USE SEAT BELT PROPERLY
TS175 –UN–23AUG88
Overturns may occur if proper operating instructions are
not followed.
Use your seat belt.
05–6
PN=6