Specifications

Maintenance
TX,90,DH2566 –19–03FEB95–1/1
CHANGING REVERSE WARNING ALARM
VOLUME
T7853AT –UN–08OCT92
IMPORTANT: The reverse warning alarm is set on
high volume at the factory. It may be
necessary to adjust the volume to meet
local regulations.
NOTE: Alarm removed from machine for clarity of
photograph.
To change alarm volume, move switch (A) to desired
position.
TX,90,DH2556 –19–02OCT92–1/1
CHECKING NEUTRAL START SYSTEM
Ö
CAUTION: Avoid possible injury or death. DO
NOT attempt to start machine unless you are
sitting in operator’s seat with the transmission
control lever in neutral "N" position. DO NOT
bypass or disable any of the starting system
parts.
Engage park brake before attempting to start
engine.
This machine has a neutral start switch that is activated
by the transmission control lever.
Check the neutral start system to ENSURE that the
machine:
1. WILL start with the transmission control lever in
neutral "N" position.
2. WILL NOT start with the transmission control lever in
forward "F" or reverse "R" position.
If starting system fails to operate correctly, have your
John Deere dealer repair the system immediately.
90–18
PN=184