Specifications

Safety
TX,05,JC242 –19–03MAR95–1/1
MAINTAIN SEAT BELT
It is important to use the seat belt on ROPS equipped
machines to minimize the chance of injury from an
accident such as an overturn. Keep the seat belt in good
condition.
The complete seat belt assembly should be replaced
after three years of usage, regardless of appearance.
Between replacement intervals:
Carefully examine buckle, webbing, and attaching
hardware.
Be sure that the retractor, if equipped, locks to prevent
belt extension after latching buckle.
Be sure that attaching hardware is in place. Tighten, if
necessary.
Replace the seat belt if it does not operate properly, or if it
is damaged, worn, or deteriorated.
TX,05,JC1051 –19–18JAN96–1/1
SECONDARY EXITS
Machines equipped with cabs are equipped with
secondary exits. For additional secondary exit
information, see “Windows” in Operator’s Station, chapter
10 of this manual.
05–7
PN=7