Specifications

Maintenance
TX,90,DH2348 –19–19MAY93–3/3
T7853AU –UN–08OCT92
6. Check the combined thickness of backing plates, brake
pads (C), (2nd pad not shown) and disk (D). If
thickness of backing plates, pads, and disk is less
than 29.0 mm (1.20 in.) or if grooves are worn off
pads, replace pads. New backing plates, pads and
disk measure 35.0 mm (1.40 in). (See your authorized
dealer.)
TX,90,JC263 –19–29NOV94–1/4
EXTERNAL SERVICE BRAKE INSPECTION
Ö
CAUTION: Prevent possible injury from hot
spraying oil. Slowly loosen plug to relieve any
air pressure.
Do first inspection at 5000 hours followed by 1000 hours
inspection intervals after the first 5000 hours inspection.
If the service brakes are subjected to severe duty, inspect
more frequently.
90–22
PN=188