Specifications

Maintenance
TX,90,DH2560 –19–12MAY93–1/2
CHECKING RIDE CONTROL
ACCUMULATOR—IF EQUIPPED
T7829AV –UN–08SEP92
Ö
CAUTION: The boom will jump upward during
this check. Make sure area around bucket is
clear.
1. Start engine.
2. Push ride control switch to OFF position.
3. Raise boom to maximum height and hold control lever
over relief for 2 seconds.
4. Lower boom and bucket to ground and stop engine.
TX,90,DH2560 –19–12MAY93–2/2
T7853AV –UN–08OCT92
5. Turn key switch to ON position. Turn ride control
switch to ON. Boom will jump upward, approximately
200 mm (8.0 in.) as accumulator (A) pressure is
released.
6. If ride control accumulator has lost gas charge, go to
your authorized dealer.
90–25
PN=191