Specifications

Maintenance
TX,DH,114 –19–06JUN91–1/2
BLEEDING BRAKES
X9811 –UN–23AUG88
Ö
CAUTION: Escaping fluid under pressure can
penetrate skin causing serious injury. Relieve
pressure before disconnecting hydraulic or
other lines. Tighten all connections before
applying pressure. Keep hands and body away
from pinholes and nozzles which eject fluids
under high pressure. Use a piece of cardboard
or paper to search for leaks. Do not use your
hand.
If ANY fluid is injected into skin, it must be
surgically removed within a few hours by a
doctor familiar with this type of injury or
gangrene may result.
NOTE: Two people are required to bleed brake system
oil, one to operate brake valve and the other to
open and close bleed screws.
1. Install frame locking bar.
2. Start engine and run at slow idle.
3. Push and hold brake pedal down until brake bleeding
procedure is complete.
90–26
PN=192