Specifications

Maintenance
TX,90,DH2541 –19–02OCT92–2/2
T7817AL –UN–08SEP92
A—Nut
B—Lever
C—Switch Assembly
D—Gap
1. Loosen nut (A).
2. Rotate switch assembly (C) to desired gap (D)
between lever (B) and bottom of pedal.
NOTE: Increasing gap (D) increases the amount of
braking applied prior to disengaging the
transmission.
3. Tighten nut (A).
4. Operate machine with clutch cut-off ON to check if
adjustment is to operator’s preference for his work
application. Adjust as required.
TX,90,DH2537 –19–03SEP92–1/1
DO NOT SERVICE CONTROL VALVES,
CYLINDERS, PUMPS OR MOTORS
Special tools and information are needed to service
control valves, cylinders, pumps, or motors.
If these parts need service, see your authorized dealer.
90–29
PN=195