Specifications

Operational Checkout
TX,95,DH2538 –19–03SEP92–1/1
OPERATIONAL CHECKOUT
Use this procedure to check all systems and functions
on the machine. It is designed so you can make a
quick check of the operation of the machine while
doing a walk around inspection and performing specific
checks from the operator’s seat.
Should you experience a problem with your machine,
you will find helpful diagnostic information in this
checkout that will pinpoint the cause. This information
may allow you to perform a simple adjustment which
will reduce the downtime of your machine. Use the
table of contents to help find adjustment procedures.
The information you provide after completing the
operational checkout will allow you or your authorized
dealer to pinpoint the specific test or repair work
needed to restore the machine to design specifications.
A location will be required which is level and has
adequate space to complete the checks. No tools or
equipment are needed to perform the checkout.
Complete the necessary visual checks (oil levels, oil
condition, external leaks, loose hardware, linkage,
wiring, etc.) prior to doing the checkout. The machine
must be at operating temperature for many of the
checks.
Start at the top of the left column and read completely
down column before performing check, follow this
sequence from left to right. In the far right column, if
no problem is found (OK), you will be instructed to go
to next check. If a problem is indicated (NOT OK), you
will be referred to either a section in this manual or to
your authorized dealer.
95–1
PN=209