Specifications

Operational Checkout
– – –1/1
MONITOR TURN
SIGNALS AND HAZARD
WARNING INDICATOR
CHECKS
T7773BB –UN–21AUG92 T6564OL –UN–19OCT88
T6633AB2 –UN–18OCT88
Move turn signal switch left, then right. Move hazard warning switch to ON.
LOOK: Left, right, and then both turn signal indicators must be flashing. Front and rear
lights (A and B) must flash as indicated by monitor lights.
OK: Go to next check
NOT OK: Check fuse.
IF OK: Check bulbs and
wiring. Go to your
authorized dealer.
– – –1/1
(TRANSMISSION CONTROLS, AXLE AND ENGINE LINKAGES, NEUTRAL START SWITCH, AND REVERSE
WARNING ALARM SWITCH CHECKS
– – –1/1
NEUTRAL START AND
REVERSE WARNING
ALARM CIRCUIT
CHECKS
T7773BI1 –UN–05AUG92
Turn key switch to ON position and wait 5 seconds.
With transmission control lever in reverse "R", forward
"F", and neutral "N" positions, turn key switch to START
.
LISTEN: Starting motor must run while lever is in neutral
"N" position only.
LISTEN: Reverse warning alarm must sound with lever
in reverse "R".
OK: Go to next check
NOT OK: Check fuse.
IF OK: Go to your
authorized dealer.
95–4
PN=212