Specifications

Operational Checkout
– – –1/1
FUEL SHUT-OFF
SOLENOID LINKAGE
CHECK—644G
T8030AN –UN–21JUN93
Open right engine side shield and inspect linkage.
LOOK: Fuel shut-off cam must be tight against the lower
stop.
Start engine and engage park brake.
Open right engine side shield and inspect linkage.
LOOK: Fuel shut-off cam must be tight against the upper
stop.
OK: Go to next check
NOT OK: Adjust fuel
shut-off solenoid linkage.
See Adjusting Fuel Shut-
Off Solenoid in
Maintenance chapter.
– – –1/1
FRONT AXLE
DISCONNECT CHECK—
IF EQUIPPED
T7747AN1 –UN–21AUG92
Move front axle disconnect lever (A) up, to disconnect
axle.
Start engine.
Lower boom to raise front wheels off ground.
Move transmission control lever to reverse “R”.
Back drag with bucket.
Observe front wheels.
LOOK: Front wheels MUST NOT turn.
Push lever down to reconnect axle.
Observe front wheels when back dragging
LOOK: Front wheels must turn.
OK: Go to next check.
NOT OK: Inspect cable
linkage to axle, repair as
required.
IF OK: Go to your
authorized dealer.
95–6
PN=214