Specifications

Operational Checkout
– – –1/1
MONITOR INDICATOR
CIRCUIT BYPASS AND
SEAT BELT INDICATOR
CHECK
Depress service brake
pedal 10 times.
Lock transmission control
lever in neutral "N".
T7773BH1 –UN–05AUG92
In a single motion, turn key and start engine.
LOOK & LISTEN: Engine should start and bypass the
bulb check mode.
T7747AH1 –UN–24AUG92 T7773BB –UN–21AUG92
LOOK: Seat belt indicator must go out after 5 seconds after engine starts.
LOOK: Monitor must display engine rpm and gauges must indicate only one reading.
Release park brake.
LOOK: Park brake indicator must go out.
NOTE: It is normal for Engine Oil Pressure, Brake Pressure, and Transmission
Pressure indicators to stay on 4—6 seconds after engine starts.
OK: Go to next check
NOT OK: Check for an
unhooked wiring
connecter.
IF OK: Go to your
authorized dealer.
– – –1/1
MONITOR PRIMARY AND
SECONDARY LEVEL
CHECKS
Engine running.
T7747AG1 –UN–24AUG92
Engage park brake
LOOK: Park brake indicator must come ON.
Move transmission control lever to forward "F".
LOOK: Park brake indicator must remain ON and STOP
indicator must come ON and flash at 1 second intervals.
Engage park brake.
OK: Go to next check
NOT OK: Go to your
authorized dealer.
95–9
PN=217