Specifications

Operational Checkout
– – –1/1
SECONDARY STEERING
SYSTEM CHECK—IF
EQUIPPED
IMPORTANT: DO NOT
operate secondary steering
pump for more than 15
seconds with the steering
in neutral or damage to the
pump and motor can
occur.
T7773BH1 –UN–05AUG92 T6601AC –UN–19OCT88
Park machine on a hard level surface with bucket off of ground and steering straight
ahead. Stop engine.
Without starting engine, turn key switch to START position and release.
Steer machine to right and left.
T7747AJ1 –UN–24AUG92
LOOK: Machine must steer approximately 1/2 way to
stops in both directions. Light in monitor must come ON
and stay ON until key switch is turned to STOP.
OK: Go to next check.
NOT OK: If secondary
steering pump and motor
do not operate, go to your
authorized dealer.
If secondary steering
pump and motor operate
but machine does not
steer, go to your
authorized dealer.
– – –1/1
SECONDARY STEERING
SYSTEM PRIMARY
CHECK VALVE CHECK
Run engine at fast idle.
Turn steering wheel rapidly until frames are against stops. Hold approximately 22 N (5
lb force) pressure on steering wheel.
Actuate a hydraulic function and hold over relief. Return control lever to neutral.
FEEL: Steering wheel MUST NOT "kick back" as hydraulic function is released.
NOTE: Steering wheel "kickback" is normal on machines without secondary steering.
OK: Go to next check
NOT OK: Go to your
authorized dealer.
95–24
PN=232