Specifications

Operational Checkout
– – –1/1
SEAT AND SEAT BELT
CHECK
IMPORTANT: Replace the
complete seat belt
assembly every three
years regardless of
appearance. A date label,
to determine the age of
the belt, is attached to
each seat belt.
T7747AP –UN–21AUG92
Standing over seat reach down and lift seat assembly to
top of travel then let go. Lift seat slowly until latch "
clicks", and release seat. Repeat for upper latch.
LOOK & FEEL: Seat must have 3 positions and must
latch in 2 upper positions.
Inspect seat shell and suspension for cracks, broken
welds or looseness.
LOOK: Seat must be in safe condition.
Check seat adjustment functions (A, B, C, E, F).
LOOK: Seat must adjust freely and remain in locked
position.
Bounce on seat to check suspension operation.
FEEL: Seat suspension must not bottom out and must
support operator’s weight.
Inspect seat belt (D) for damage.
LOOK: Seat belt must lock and not be damaged or worn.
FEEL: Seat belt must stay adjusted snugly and not slip
in adjuster.
OK: Go to next check
NOT OK: Replace any
worn or broken parts.
Lubricate moving parts of
suspension and seat
adjusters. Go to your
authorized dealer.
– – –1/1
TOOLBOX DOOR CHECK Unlock and open toolbox door under seat in operator’s station.
Close and lock door.
LOOK: Door must open and close smoothly.
FEEL: Lock must operate freely and key MUST NOT stick in lock.
OK: Go to next check.
NOT OK: Lubricate
hinges. Lubricate or
repair lock.
95–32
PN=240