Specifications

Troubleshooting
TX,100,DH2481 –19–02OCT92–7/12
Symptom Problem
Solution
Turbocharger. Remove air intake hose and exhaust
elbow. Leading edge of compressor
vanes must be sharp and straight.
Spin compressor wheel and listen
for noisy bearings. Turbine and
compressor wheels must not rub in
housing.
Engine Emits Excessive Blue Or Cranking speed too low. Check batteries and connections.
White Smoke
Incorrect grade of fuel. Drain fuel tank and add correct fuel.
(See Fuel and Lubricants chapter.)
Injection pump out of time. See your authorized dealer.
Engine running too cold. See your authorized dealer.
Injection nozzle(s). See your authorized dealer.
Low compression. Remove injection pump fuse. Crank
engine and listen for air leaking past
valves. Start engine and observe
blow-by from vent tube. See your
authorized dealer.
Excessive wear in liners and/or See your authorized dealer.
piston rings stuck.
Worn valve guides. See your authorized dealer.
Slow Acceleration. Incorrect grade of fuel. Drain fuel tank and add correct fuel.
Fuel injection pump. See your authorized dealer.
Injection nozzle(s). See your authorized dealer.
Detonation Starting aid solenoid stuck open. See your authorized dealer.
Incorrect injection pump timing. See your authorized dealer.
Incorrect injection pump advance. See your authorized dealer.
Continued on next page
100–8
PN=250