Specifications

Troubleshooting
TX,100,DH2483 –19–09SEP92–4/7
Symptom Problem
Solution
Oil cooler clogged internally. See your authorized dealer.
Incorrect system or circuit relief See your authorized dealer.
valve setting.
Restriction in oil lines or loader See your authorized dealer.
valve.
Pinched or restricted priority valve See your authorized dealer.
"LS" line.
Priority valve. See your authorized dealer.
Leaking system relief valve. See your authorized dealer.
Worn hydraulic pump (internal See your authorized dealer.
leakage).
Function Drops Before Raising Stuck open lift check. See your authorized dealer.
When Valve Is Activated
Hydraulic Oil Foams Low oil level. Fill to correct level. (See
Maintenance—Every 10 Hours or
Daily chapter.)
Wrong oil. Change to recommended oil. (See
Fuels and Lubricants chapter.)
Water in oil. Change oil. (See Maintenance—
Every 3000 Hours chapter.)
Loose or faulty suction lines (air leak Tighten or install new lines.
in system).
Slow Or Hard Steering Cold oil. Warm the hydraulic oil.
Low priority valve pressure setting. See your authorized dealer.
Worn hydraulic pump. See your authorized dealer.
Sticking priority valve spool. See your authorized dealer.
Broken priority valve spring. See your authorized dealer.
Pinched or restricted "LS" line. See your authorized dealer.
Continued on next page
100–25
PN=267