Specifications

Troubleshooting
TX,100,DH2484 –19–27OCT92–3/6
Symptom Problem
Solution
Transmission System Pressure Is Transmission control valve gasket. Inspect transmission control valve for
Low (One Or Two Gears) external leakage. Remove control
valve. Inspect and replace gasket, if
necessary.
Clutch piston or seal ring leakage. See your authorized dealer.
Transmission Shifts Too Slow Low oil level (aeration of oil). Check and add oil. (See
Maintenance—Every 10 Hours or
Daily chapter.)
Low transmission pressure. See your authorized dealer.
Transmission pump suction screen See your authorized dealer.
restricted.
Low transmission pump flow. See your authorized dealer.
Excessive transmission element See your authorized dealer.
leakage.
Modulation valve. See your authorized dealer.
Two-stage piston. See your authorized dealer.
Oil passages restricted between See your authorized dealer.
control valve and transmission
elements.
Transmission Shifts Too Fast System pressure too high. See your authorized dealer.
Stuck modulation valve. See your authorized dealer.
Stuck or missing check valves. See your authorized dealer.
Damaged or missing orifice seal in See your authorized dealer.
control valve.
Broken piston return spring. See your authorized dealer.
Continued on next page
100–31
PN=273