Specifications

Troubleshooting
TX,100,DH2484 –19–27OCT92–4/6
Symptom Problem
Solution
Machine "Creeps" In Neutral Warped disks and plates in See your authorized dealer.
transmission.
Transmission Hydraulic System High oil level. Check and adjust.
Overheats
Low oil level. Check and correct. (See Fuels and
Lubricants Chapter.)
Wrong oil grade. Check oil grade. (See Fuels and
Lubricants Chapter.)
Park brake engaged. Release park brake.
Lube lines pinched, restricted, or Check cooler lines.
leaking.
Machine operated in too high gear Operate machine in correct gear
range. range.
Temperature gauge or sender. See your authorized dealer.
Air flow through oil cooler or radiator See your authorized dealer.
restricted.
Oil cooler thermal relief bypass valve See your authorized dealer.
stuck.
Oil cooler internally restricted. See your authorized dealer.
Warped disks and plates in See your authorized dealer.
transmission.
Leakage in transmission hydraulic See your authorized dealer.
system.
Low transmission pump output. See your authorized dealer.
Excessive Transmission Noise Engine low idle too low. Adjust. (See Adjust Engine Speed
(Under Load Or No Load) Linkage in Maintenance—Every
1000 Hours chapter.)
Continued on next page
100–32
PN=274