Specifications

Troubleshooting
TX,100,DH2485 –19–18SEP92–1/2
SERVICE BRAKES
Symptom Problem
Solution
Poor Or No Brakes Brake accumulator charge low. See your authorized dealer.
Brake pump standby pressure low. See your authorized dealer.
Low brake pressure. See your authorized dealer.
Air in system. Bleed brakes. (See Bleeding Brakes
in Maintenance chapter.)
Worn brake pads. Inspect brake pads.
Brake valve leakage. See your authorized dealer.
Brake piston seal leakage. Check for an overfilled differential.
Remove differential check plug.
Apply brakes and check for leakage
from check plug.
Internal restriction in circuit. Remove lines and components.
Aggressive Brakes Clutch cut-off switch out of Adjust switch. (See Adjusting Clutch
adjustment. Cut-Off Switch in Maintenance
chapter.)
Brake valve. See your authorized dealer.
Low oil level. Check oil level.
Brakes Drag Brake pedal not returning properly. Inspect.
Stuck brake piston. See your authorized dealer.
Debris holding spool down in brake See your authorized dealer.
valve.
Warped brake disk. Inspect brake pads. (See Inspecting
Brake Pads in Maintenance
chapter.)
Brake valve. See your authorized dealer.
Continued on next page
100–35
PN=277