Specifications

Storage
TX,105,FF1190 –19–03AUG92–1/3
PREPARE MACHINE FOR STORAGE
T47764 –UN–09NOV88
1. Repair worn or damaged parts. Install new parts, if
necessary, to avoid needless delays later.
2. Loosen alternator and fan belts.
3. Clean primary air cleaner element.
TX,105,FF1190 –19–03AUG92–2/3
T5813AM –UN–09FEB89
IMPORTANT: High pressure washing [greater than
1379 kpa (13.8 bar) (200 psi)] can
damage freshly painted finishes. Paint
should be allowed to air dry for 30
days minimum after receipt of machine
before cleaning parts or machine with
high pressure. Use low pressure wash
operations until 30 days have elapsed.
4. Wash the machine. [Use low pressure wash
operations (less than 1379 kpa (13.8 bar) (200
psi)) until 30 days after receipt of machine.] Paint
areas to prevent rust. Replace decals, where
needed.
5. Remove seat cushion and other perishable items.
IMPORTANT: LPS 3

Rust Inhibitor can destroy
painted finish. DO NOT spray LPS 3
Rust Inhibitor on painted surfaces.
6. Retract all hydraulic cylinders, if possible. If not,
coat exposed cylinder rods with LPS 3 Rust
Inhibitor.
7. Lubricate all grease points.
8. If possible, raise machine high enough so tires do
not touch the ground. If not, park on a hard surface
to prevent tires from freezing to ground.
9. Store machine in a dry, protected place. If stored
outside, cover with a waterproof material.
105–1
PN=284