Specifications

Safety
TX,05,DH2122 –19–31JUL92–2/2
8. Allow engine to cool.
Keep all parts in good condition and properly installed.
Fix damage immediately. Replace worn or broken
parts. Remove any buildup of grease, oil, or debris.
Disconnect battery ground cable (-) before making
adjustments on electrical systems or welding on
machine.
DX,LOWER –19–04JUN90–1/1
SUPPORT MACHINE PROPERLY
TS229 –UN–23AUG88
Always lower the attachment or implement to the ground
before you work on the machine. If you must work on a
lifted machine or attachment, securely support the
machine or attachment.
Do not support the machine on cinder blocks, hollow tiles,
or props that may crumble under continuous load. Do not
work under a machine that is supported solely by a jack.
Follow recommended procedures in this manual.
05–17
PN=17