Specifications

Safety
DX,FLUID –19–03MAR93–1/1
AVOID HIGH-PRESSURE FLUIDS
X9811 –UN–23AUG88
Escaping fluid under pressure can penetrate the skin
causing serious injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic or other lines. Tighten all
connections before applying pressure.
Search for leaks with a piece of cardboard. Protect hands
and body from high pressure fluids.
If an accident occurs, see a doctor immediately. Any fluid
injected into the skin must be surgically removed within a
few hours or gangrene may result. Doctors unfamiliar
with this type of injury should reference a knowledgeable
medical source. Such information is available from
Deere & Company Medical Department in Moline, Illinois,
U.S.A.
TX,05,FF2787 –19–27JUL94–1/1
CLEAN THE MACHINE REGULARLY
T6642EJ –UN–18OCT88
Remove any grease, oil, fuel, or debris build-up to avoid
possible injury or machine damage.
High pressure washing [greater than 1379 kpa (13.8 bar)
(200 psi)] can damage freshly painted finishes. Paint
should be allowed to air dry for 30 days minimum after
receipt of machine before cleaning with high pressure.
Use low pressure wash operations until 30 days have
elapsed.
Do not spray oil cooler fins at an angle. Fins may bend.
05–19
PN=19