Specifications

Checklists
TX,50,JC1160 –19–03JUN96–1/1
MAINTENANCE AND REPAIR RECORD KEEPING SYSTEM
Model: ❒ 544G ❒ 544G LL ❒ 544G TC ❒ 624G ❒ 644G Customer:
PIN/Serial Number: Delivery Date: Hour Meter Reading:
Oil Sampling
Oil samples should be taken from each system prior to its recommended drain/change interval indicated on this form. Maintenance
recommendations supplied by OILSCAN will be provided based upon the oil analysis and operating information you supply. Regular oil
sampling will extend the operational life of your machine’s systems.
Every 250 Hours
❒ Check receiver dryer moisture indicator ❒ Replace engine oil filter
❒ Drain and refill engine oil ❒ Check radiator coolant level
Comments:
Date: Hour Meter Reading: Maintenance Performed By:
Every 500 Hours
❒ Lubricate front drive line ❒ Replace final fuel filter
❒ Check air intake hoses ❒ Replace hydraulic system return filter
❒ Check battery water level ❒ Replace hydraulic reservoir breather filter
❒ Add rust inhibitor to radiator ❒ Check front and rear differential oil level
❒ Replace primary fuel filter
Comments:
Date: Hour Meter Reading: Maintenance Performed By:
Every 1000 Hours
❒ Lubricate rear drive line ❒ Change transmission oil
❒ Check and adjust engine speed linkage ❒ Replace transmission filter
❒ Replace air cleaner dust unloader valve ❒ Inspect and adjust park brake
❒ Replace air cleaner elements ❒ Lubricate frame hinge pivots
❒ Remove and clean engine crankcase vent tube
Comments:
Date: Hour Meter Reading: Maintenance Performed By:
Every 2000 Hours
❒ Adjust engine valve lash ❒ Lubricate front driveline support bearing
Comments:
Date: Hour Meter Reading: Maintenance Performed By:
Every 3000 Hours
❒ Change hydraulic system oil ❒ Replace differential lock return filters
❒ Clean hydraulic system suction strainer ❒ Change front and rear differential oil
Comments
Date: Hour Meter Reading: Maintenance Performed By:
CLIS–2
PN=313