Specifications

Operator’s Station
TX,10,JC246 –19–29NOV94–1/2
ADJUSTING SUSPENSION SEAT
T7829AP –UN–31AUG92
A—Lumbar Depth Adjustment Knob
B—Armrest Tilt Adjustment Knob
C—Backrest Tilt Adjustment Knob
D—Fore-Aft Adjustment Lever
E—Window
F—Weight Adjustment Knob
Ö
CAUTION: You can lose control of machine
and be injured if seat is loose. Be sure seat is
properly locked in position before operating
the machine.
• Suspension seat is equipped with a weight adjustment
feature of 50—130 kg (110—285 lb). Turn knob (F) to
adjust seat to weight of the operator. Weight is
displayed in window (E). Turn knob clockwise for a
heavier operator and counterclockwise for a lighter
operator.
• Turn knob (A) to make lumbar adjustment. Turn knob
counterclockwise to move backrest cushion forward
against operator’s back. Turn knob clockwise to move
lower cushion forward against operator’s back.
• Turn knob (B) clockwise to raise tilt of armrest. Turn
knob counterclockwise to lower tilt of armrest.
• Lift lever (C) to tilt backrest cushion forward or
rearward. Keep weight off seat when making this
adjustment. Release lever to lock in place.
• Lift lever (D) to move seat forward or rearward.
Release lever and slide seat to lock in place.
Ö
CAUTION: Seat can move rapidly and may
cause an injury. DO NOT put your full weight on
seat while adjusting height.
TX,10,JC246 –19–29NOV94–2/2
T6782AF –UN–19OCT88
To raise seat, stand over seat, grasp at bottom edge of
seat cushion, and slowly lift; each click is a position. To
lower seat, lift as high as possible and release. Seat will
return to lowest position.
10–19
PN=50