Specifications

Break-in
TX,15,DH1828 –19–16JUN93–1/1
AFTER FIRST 10 AND FIRST 50 HOURS
Tighten wheel retainer cap screws to 542 N•m (400 lb-ft).
TX,15,DH2147 –19–16JUN93–1/1
AFTER THE FIRST 100 HOURS
1. Check hardware torque. (See Hardware Torque
Specifications in Maintenance chapter.)
2. Perform 100 hours service. (See Maintenance—Every
100 Hours chapter.)
3. Change engine oil and filter. (See Maintenance—
Every 250 Hours chapter.)
4. Change hydraulic reservoir return filter. (See
Maintenance—Every 500 Hours chapter.)
5. Change transmission oil and filter. (See
Maintenance—Every 1000 Hours chapter.)
6. Change differential oil. (See Maintenance—Every
3000 Hours chapter.)
7. Change differential lock return filter(s)—if equipped.
(See Maintenance—Every 3000 Hours chapter.)
15–2
PN=53