Specifications

Pre-Start Inspection
TX,20,JC273 –19–29NOV94–1/1
INSPECT MACHINE DAILY BEFORE
STARTING
T8374AB –UN–02DEC94
Do periodic service checks in the Maintenance—Every 10
Hours or Daily chapter.
A-Check wheels (front and rear) for loose or missing
hardware.
B-Clean operator’s station.
C-Check air inlet cover.
D-Clean radiator.
E-Check fuel level.
F-Check tires (front and rear).
ELECTRICAL SYSTEM: Check for worn or frayed wires
and loose or corroded connections.
BOOM, BUCKET, SHEET METAL: Check for bent,
broken, loose, or missing parts.
HARDWARE: Check for loose or missing parts.
PARK BRAKE: Check for correct operation.
HYDRAULIC SYSTEM: Check for leaks, missing or loose
clamps, kinked hoses, and lines or hoses that rub against
each other or other parts.
LUBRICATION: Check lubrication points shown on
Periodic Maintenance Chart.
PROTECTIVE DEVICES: Check guards, shields, ROPS,
covers, seat belt.
SAFETY: Walk around machine to clear all persons from
machine area.
20–1
PN=54