Specifications

Operating the Engine
TX,25,DH2148 –19–22JUN93–1/1
CHECK INSTRUMENTS BEFORE STARTING
Turn key switch clockwise to ON position.
All indicator lights must light. If any indicator light fails to
light, the bulb may be burned out. If bulb is not burned
out, but indicator light still fails to light, see your
authorized dealer.
TX,25,DH2149 –19–22JUN93–1/1
BRAKE PRESSURE INDICATOR
T7739AJ –UN–30JUL92
The brake pressure indicator light (A), STOP indicator
light (B), and audible alarm may come on during initial
start-up, but must be off during normal operation. DO
NOT operate machine if the lights remain on. See your
authorized dealer.
TX,25,DH2284 –19–31JUL92–1/3
STARTING THE ENGINE
TS177 –UN–11JAN89
Ö
CAUTION: Avoid possible injury or death from a
runaway machine.
DO NOT start engine by shorting across starter
terminals. Machine will start in gear if normal
circuitry is bypassed.
NEVER start engine while standing on ground.
Start engine only from operator’s seat, with
transmission control lever in neutral "N".
Engage park brake.
Use of seat belt with roll-over protective
structure (ROPS) is recommended under all
operating conditions.
1. Fasten seat belt.
2. Sound the horn.
25–1
PN=55