Specifications

Operating the Engine
TX,25,DH2284 –19–31JUL92–3/3
T7747BU –UN–19MAY92
4. Hold accelerator pedal (C) down 1/3 of the way to the
floor.
5. Turn key switch to ON position. Push horn button to
sound horn.
IMPORTANT: Never operate starter motor for more
than 20 seconds at a time. If engine
fails to start after two or three tries,
return key switch to STOP position.
Wait for about 2 minutes, then try again.
After a false start, DO NOT turn key
switch until engine stops or starter
may be damaged.
Engine will not start by towing or
pushing. Permanent damage to
transmission will result.
6. Turn key switch to START position. DO NOT crank
engine more than 20 seconds. Wait 2 minutes before
trying again. Release key when engine starts.
IMPORTANT: If STOP indicator light does not go out
within 10 seconds after starting engine,
STOP THE ENGINE. Find and correct
the cause.
7. Operate machine at less than normal loads and at slow
idle speed until engine warms up.
IMPORTANT: If engine stops when operating under
load, remove load. Restart engine
immediately. Run 30 seconds at 1/2
speed before adding load.
25–3
PN=57