Specifications

Operating the Engine
TX,25,DH2550 –19–12MAY93–1/1
CHECK INSTRUMENTS AFTER STARTING
Ö
CAUTION: Prevent possible injury, or machine
damage. If STOP indicator light does not go
out within 10 seconds after starting engine,
STOP THE ENGINE. Find and correct the cause.
Cold oil may cause hydraulic oil filter restriction indicator
light to come on temporarily.
Turn signal and park brake lights will come on if the
function is engaged.
Engine coolant temperature gauge will flash until
temperature reaches 38°C (100°F).
Fuel gauge first arrow will flash if fuel is low.
TX,25,JC247 –19–29NOV94–1/1
WARM-UP
Operate machine at less-than-normal loads and speeds
for first few minutes until temperatures and pressures
reach normal operating range.
25–7
PN=61