Specifications

Operating the Engine
TX,DH,40 –19–17JUN91–1/1
COLD WEATHER WARM-UP
IMPORTANT: If hydraulic oil is cold, hydraulic
functions move slowly. Do not attempt
normal loader operation until hydraulic
functions move at close-to-normal
cycle times.
1. Run engine at 1/2 speed for 5 minutes.
2. Cycle boom and bucket functions until functions move
at normal speed.
TX,25,DH2168 –19–16JUN93–1/2
STOPPING THE ENGINE
IMPORTANT: Prevent possible engine damage. If
engine stops when operating under
load, remove load. Restart engine
immediately. Run 30 seconds at 1/2
speed before adding load.
1. Park machine on level surface.
2. Lower bucket to ground.
25–8
PN=62