Specifications

Driving the Machine
TX,30,JC248 –19–29NOV94–2/2
T7747AM –UN–19MAY92
Change direction of machine by moving transmission
control lever (A) to forward "F" or reverse "R" position.
Change speed of machine by moving transmission control
lever to desired gear. Machine has four forward gears
and three reverse gears. Shifting to 4th gear reverse will
give same travel speed as 3rd gear reverse. Select a
gear suitable to operating and road conditions.
When transmission control lever is positioned in 4th gear,
transmission is in "automatic" mode. In "automatic" mode,
transmission starts out in 2nd gear, then shifts to 3rd and
4th gear as speed increases. It will also automatically
downshift from 4th to 3rd to 2nd gear as speed
decreases.
IMPORTANT: Prevent possible transmission damage.
DO NOT change forward and reverse
directions at high speeds.
If speed is less than 7 mph, a direction
change can be made in any gear. If
speed is greater than 7 mph,
transmission will automatically shift
down to 2nd gear prior to changing
directions.
Forward and reverse directions can be
changed without stopping the machine
in 1st and 2nd gears.
30–4
PN=67