Specifications

Driving the Machine
TX,30,DH2505 –19–16JUN93–1/1
RIDE CONTROL SWITCH—IF EQUIPPED
T7829AV –UN–08SEP92
Ö
CAUTION: Prevent possible injury from
unexpected boom movement. The bucket may
"jump up" when ride control switch is turned
ON.
Turn ride control switch ON to improve machine ride and
reduce tire flexing when traveling over rough terrain at a
high speed with loaded bucket.
If engine is stopped with ride control switch in ON
position, ride control is automatically disengaged. Start
the engine, press switch to OFF and then back to ON to
engage ride control. Switch will be backlit when engaged
(ON).
To discharge the energy in the ride control accumulator,
do the following:
1. Make sure area around bucket is clear.
2. Lower bucket to ground.
3. Stop engine.
4. Turn key switch to ON.
5. Move hydraulic control lever to float detent position.
6. Cycle ride control switch from OFF to ON.
7. Push boom down switch to release accumulator
pressure.
TX,30,DH2173 –19–31JUL92–1/1
STOPPING THE MACHINE
T7747BS –UN–19MAY92
Depress left brake pedal (A) or right brake pedal (B) to
stop the machine.
Left brake pedal also serves as a clutch cut-off pedal
when clutch cut-off switch is in "clutch disengaged"
position.
30–6
PN=69