Specifications

Operating the Machine
TX,35,DH2177 –19–29NOV94–1/1
BOOM AND BUCKET CONTROL LEVER—
ONE LEVER DESIGN
T7773AC –UN–11JUN92T8373BA –UN–02DEC94
A—Lower Boom
B—Float
C—Dump Bucket
D—Raise Boom
E—Boom Height Kickout
F—Rollback Bucket
G—Return-to-Dig
H—Fast Bucket Dump
I—Boom Down Switch
Move control lever forward (A) to lower boom, or rearward
(D) to raise boom.
NOTE: Boom down switch (I) must be pushed while
moving control lever forward to lower boom with
engine stopped.
Move control lever left (F) to roll back bucket, or right (C)
to dump bucket. 544G LL and 544G TC will also have a
fast dump bucket position (H).
Float (lever in full forward detent position [B]): This
position allows oil to flow in and out both ends of
cylinders so the bucket can follow the contour of the
ground. Manually release lever from this position.
Return-to-Dig (lever in full left detent position [G]): Bucket
will return to set dig position.
Boom Height Kickout (lever in full rear detent position [E]):
Lever will remain in this position until boom is at a pre-set
height, then will return to neutral automatically.
Boom and bucket functions can be operated
simultaneously by moving lever between positions. For
example, to raise boom and roll back bucket, move lever
between positions (D) and (F).
35–1
PN=72