Specifications

Operating the Machine
TX,35,DH2178 –19–29NOV94–1/1
BOOM AND BUCKET CONTROL LEVER—
TWO LEVER DESIGN
T7773AE –UN–11JUN92T8373BA –UN–02DEC94
A—Dump bucket
B—Rollback Bucket
C—Return-to-Dig
D—Float
E—Lower Boom
F—Raise Boom
G—Boom Height Kickout
H—Fast Bucket Dump
I—Boom Down Switch
Move left control lever forward (A) to dump bucket, or
rearward (B) to roll back bucket. 544G LL and 544G TC
will also have a fast dump bucket position (H).
NOTE: Boom down switch (I) must be pushed while
moving control lever forward to lower boom with
engine stopped.
Move right control lever forward (E) to lower boom or
rearward (F) to raise boom.
Float (right lever in full forward detent position [D]): This
position allows oil to flow in and out both ends of
cylinders so the bucket can follow the contour of the
ground. Manually release lever from this position.
Return-to-Dig (left lever in full rearward detent position
[C]): Bucket will return to set dig position.
Boom Height Kickout (right lever in full rearward detent
position [G]): Lever will remain in this position until boom
is at a pre-set height, then will return to neutral
automatically.
35–2
PN=73