Specifications

Operating the Machine
TX,35,DH2287 –19–29NOV94–1/1
PIN DISCONNECT SWITCH—544G TC
T8373AW –UN–02DEC94
Use the pin disconnect switch (A) when adding or
changing equipment.
Hold down switch to retract pins on coupler.
Release switch to extend and lock pins in place.
TX,35,DH2179 –19–29NOV94–1/1
BOOM DOWN SWITCH
T8373AX –UN–02DEC94
Push boom down switch (A) while moving control lever
forward to lower boom with the engine stopped.
TX,35,DH2180 –19–29NOV94–1/1
CLUTCH CUT-OFF SWITCH—IF EQUIPPED
T8373AZ –UN–02DEC94T7747BY –UN–19MAY92
Ö
CAUTION: Prevent possible injury from
unexpected machine movement. When stopping
on inclines, push clutch cut-off switch to
engaged position before releasing left service
brake. This will prevent the machine from
rolling downhill during transmission re-
engagement cycle.
The clutch cut-off switch (A) must be in clutch disengaged
position before left brake pedal (B) can be used to
disengage transmission clutches. Move switch up to
clutch disengaged position.
Use the clutch cut-off switch in situations such as truck
loading where machine positioning and maximum
hydraulics are needed.
NOTE: The park brake will also disengage the
transmission clutches. Release park brake before
operating.
35–5
PN=76