Specifications

Operating the Machine
TX,35,DH2183 –19–31JUL92–1/2
ADJUSTING BOOM HEIGHT KICKOUT—IF
EQUIPPED
1. Start engine.
2. Move control lever to boom raise detent position and
release.
TX,35,DH2183 –19–31JUL92–2/2
T6601AI –UN–21OCT88
A—Clearance
B—Cap Screws
C—Cap Screws
D—Mark
3. After control lever returns to neutral, make a mark (D)
on the magnet and the boom height kickout switch.
4. Position the boom in the desired boom height kickout
position. Stop engine.
5. Loosen cap screws (B) and slide bracket to align
marks on magnet and boom kickout switch.
6. Loosen cap screws (C) and adjust clearance (A)
between magnet and boom height kickout switch to 9 ±
3 mm (0.35 ± 0.12 in.).
7. Check boom height kickout for correct adjustment.
35–7
PN=78