Specifications

Operating the Machine
02T,35,J8 –19–25JUN91–1/1
TRUCK LOADING
T7511CN –UN–27JUN91
The most efficient technique for truck loading is the "V"
method.
1. Level bucket and lower to the ground.
2. Run engine near fast idle to penetrate material.
3. Increase engine speed to fast idle and crowd into the
pile.
4. As engine rpm starts to decrease, pull loader control
lever back and to the left.
5. Feather hydraulics to obtain a smooth combination of
bucket rollback and boom lift.
6. After filling the bucket, reverse loader and articulate
35—40 degrees. If truck is positioned close to the
stockpile, raise boom to level position while reversing.
7. Travel forward to the truck while raising the boom to
clear truck sideboards. Dump load.
8. Reverse direction and lower bucket to several inches
above ground level.
35–13
PN=84