Specifications

Transporting

TX,40,FF3416 –19–27MAY93–1/1

TRANSPORTING PRECAUTIONS

If machine is transported, check route for road width and

overhead clearance. Check any bridges for weight limits.

(See Specifications chapter.)

TX,40,JC274 –19–29NOV94–1/2

LOADING MACHINE ON A TRAILER

T8301AK –UN–17AUG94

1. Keep the trailer bed clean. Put chock blocks against

trailer wheels.

2. Use a ramp or loading dock. Ramps must be strong

enough, have a low angle, and correct height.

3. Fasten seat belt before starting engine.

CAUTION: Position the machine so that its

centerline is over the centerline of the truck

bed. NEVER steer the machine while on the

ramp. If changing direction is required on the

ramp, unload the machine from the ramp,

reposition the machine on the ground, then try

loading again.

4. Drive the machine onto the ramp slowly. The centerline

of the machine should be over the centerline of the

trailer.

5. Lower all equipment onto blocks or trailer bed.

40–1

PN=85