User manual

25
Flame adjustment
Oven burners
The burner is well adjusted when the flame
is stable silent ant dies out without any
noise.
• when the flames are too short, whistling
or have the tendency to detach of the
burners ignite at the nozzles means that
the air admission has to be diminished. If
there is too much air flames risk to die
out.
• but, if the flames are too long, soft,
lighting, the air admission has to be
increased. These flames smoke the
bottom of pans.
- Loosen the screw M which fixing the air
adjuster A;
- Move the air adjuster A forward or
backward till getting the right adjustment
(see table no. 2);
- Tighten the fixing screw M.
Grill burner
- Loosen the screw fixing the Venturi.
- Move the pipe left or right till getting the
right adjustment (see table no. 2)
Tighten the fixing screw.
Lit the burner in order to check the aspect of
flame.
M
A
air adjusting
adjusting pipe screw
opening