User manual

Technical data sheet for
GRIDDLE TOASTER 600mm
GT8600G
Griddle plate with toaster under
16mm griddle plate
Individual dual burners
Large capacity grease collection drawer
Stainless steel exterior
Easy clean
Easy service
Fully modular
Overall Construction
• 16mm machined surface mild steel griddle plate
• 2.5mm stainless steel integral splashguard as sides and rear
• 2.5mm stainless steel grease channel at front of plate
• Stainless steel grease collection drawer below mid shelf
• Dual burners with individual pilot and flame failure
• Stainless steel radiant reflectors on burners for efficient toasting
• Welded 1.5mm 304 stainless steel bull nose
• Splashback and hob sides 1.2mm 304 stainless steel
• Front panels and sides 0.9mm 304 stainless steel
• Toasting compartment 1.2mm high temperature aluminised steel
• Base shelf and mid shelf finished in 0.9mm 304 stainless steel
• Vitreous enamel steel spill tray
• Chrome wire toasting rack with integral crumb tray
• Chrome wire rack supports
• 150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel
with adjustable feet
Controls
• Large easy use control knobs - heat resistant reinforced
• Easy view control settings on knobs
• Dual controls with variable high to low burner setting
• Flame failure pilot burners
• Piezo ignition to pilot burners
Cleaning and Servicing
• Plate top side weld sealed to splashguard
• Removable grill rack system, rack supports, and crumb tray
• Removable grease drawer
• Easy clean stainless steel exterior
• Access to all parts from front of unit