Specifications Part 2

ManualsBrandsMohawk Industries ManualsLuxury VinylMohawk Industries Timbers Path 6" x 48" Embossed Wood Luxury Vinyl Plank Flooring

Page!1!of!5! 6063-M!(2016-3-21)!

160!S.!Industrial!Blvd!

Calhoun,!GA!30701!

Section!096519!

RESILIENT!FLOORING:!Timbers Path!

This!document!is!intended!as!a!suggested!guide!for!editing!your!architectural!guide!specification.!

Mohawk!Group!will!not!be!held!liable!for!damages!arising!out!of!the!use!of!any!information!or!specifications!found!in!this!document.!Make!sure!you!

have!the!latest!publication!for!this!specification.!!

Product!selection!and!accuracy!of!all!project!specifications!are!th e!s pe cifie r’s!or !de sign e r’s!re spo nsib ility.!

PART!1!–!GENERAL!INFORMATION!

1.1 !!!!SECTION!INCLUDES!

A. This!section!deals!with!resilient!flooring!found!in!the!drawings!and!schedules!of!the!contract!that!meet!the

requirements !of!this!sec tion .

B. Related!Documents:!Drawings!and!general!provisions!of!the!contract!apply!to!the!work!of!this!section.

1.2!!!!!RELATED!SECTIONS!

Note%to%Specifier:%Delete%any%sections%below%not%relevant%to%this%project%and%add%others%as%required.%

A. Division!3!–!Concrete:!not!covered!in!this!section.

B. Division!6!–!Wood!and!plastic:!not!covered!in!this!section.

C. Division!7!–!Thermal!and!humidity!protection:!not!covered!in!this!section.

D. Division!9!–!Other!sections!containing!information!related!to!floor!finishes:!not!covered!in!this!section.

1.3!!!!!REFERENCES!(INDUSTRY!STANDARDS)!

A. ASTM!F!710:!Practice!for!Preparing!Concrete!Floors!to!Receive!Resilient!Flooring.

B. ASTM!E!648:!Test!Method!for!Critical!Radiant!Flux!of!Floor!Covering!Systems!Using!a!Radiant!Heat!Energy

C. ASTM!E!662:!Test!Method!for!Specific!Optical!Density!of!Smoke!Generated!by!Solid!Materials.

D. ASTM!F!1869:!Standard!Test!Method!for!Measuring!Moisture!Vapor!Emission!Rate!of!Concrete!Subfloor!Using

Anhydrous!Calcium!Chloride.

E. ASTMF!1700:!Standard!Specification!for!Solid!Vinyl!Tile

F. ASTM!2055:!Standard!Test!Method!for!Determining!Size!and!Squareness!of!Resilient!Floor!Tile!by!Dial!Gauge

Method

G. AS

TM!F386:!Standard!Test!Method!for!Thickness!of!Resilient!Flooring!Materials!Having!Flat!Surfaces

H. ASTM!2199:!Standard!Test!Method!for!Determining!Dimensional!Stability!of!Resilient!Floor!Tile!after!Exposure

to!Heat

I. AS

TM!970:!Standard!Test!for!Static!Load!Limit

J. ASTM!1914:!Standard!Test!Method!for!Short-Term!Indentation!and!Residual!Indentation!of!Resilient!Floor

Covering

K. ASTM!D2047:!Standard!Test!Method!for!Static!Coefficient!of!Friction!of!Polish-Coated!Floor!Surfaces!as

Measured!by!the!James!Machine

L. ASTM!F925:!Standard!Test!Method!for!Resistance!to!Chemicals!of!Resilient!Flooring

Summary of content (5 pages)

PAGE 1
60 S. Industrial Blvd Calhoun, GA 30701 Section 096519 RESILIENT FLOORING: Timbers Path This document is intended as a suggested guide for editing your architectural guide specification. Mohawk Group will not be held liable for damages arising out of the use of any information or specifications found in this document. Make sure you have the latest publication for this specification. Product selection and accuracy of all project specifications are the specifier’s or designer’s responsibility.
PAGE 2
M. ASTM F137: Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus N. ASTM F1515: Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change O. ASTM F1514: Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change 1.4 SUBMITTALS A. Provide the product’s Technical Specifications data sheet as well as all Installation and Maintenance Instructions. B.
PAGE 3
D. Do not install on cement slabs unless they are thoroughly cleaned, level, structurally sound and free from paint, varnish, adhesive, oil, grease, solvent, sealer and curing compounds or other foreign substances that may adversely affect adhesion. PART 2 - PRODUCTS 2.1 MANUFACTURER A. COMPANY Mohawk Group 160 South Industrial Blvd. Calhoun, GA 30701 Telephone: 800-554-6637 Fax: 877-244-8054 Website: www.mohawkgroup.com B. C. 2.2 Manufacturer must have a headquarters in the United States of America.
PAGE 4
PART 3 – EXECUTION 3.1 3.2 SITE INSPECTION A. Examine the subfloor before installation to ensure that the surface is clean, dry, smooth, structurally sound and free from foreign substances that may adversely affect adhesion or cause discoloration.
PAGE 5
B. Before allowing traffic after installation, consult and follow the recommendations in Mohawk Group’s Installation Instructions. C. Following installation and cleanup, if the work of all other trades has not yet been completed, protect the flooring by laying sheets of non-staining brown Kraft paper, and then a layer of plywood sheets (rolls of nonstaining heavy cardboard material could also be used for protection). D.