SDS

Date Printed: 11/21/2017 Product: M319-C0202
4. First-aid Measures
FIRST AID - EYE CONTACT: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
FIRST AID - SKIN CONTACT: IF ON SKIN: Gently wash with plenty of Soap and Water. If skin irritation occurs: Get medical advice/
attention.
FIRST AID - INGESTION: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. IF exposed or if you feel unwell: Call a POISON
CENTER or doctor/physician.
FIRST AID - INHALATION: IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable
for breathing. IF exposed or if you feel unwell: Call a POISON CENTER or doctor/physician.
5. Fire-fighting Measures
SPECIAL FIREFIGHTING PROCEDURES: This product is not expected to burn under normal conditions of use.
FIREFIGHTING EQUIPMENT: None.
6. Accidental Release Measures
ENVIRONMENTAL MEASURES: No Information
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Sweep up or vacuum up spillage and collect in suitable
container for disposal.
7. Handling and Storage
HANDLING: Avoid inhalation and contact with eyes, skin, and clothing. Wash hands thoroughly after handling and before eating or
drinking. In keeping with safe handling practices, avoid ignition sources (smoking, flames, pilot lights, electrical sparks); ground and
bond containers when transferring the material to prevent static electricity sparks that could ignite vapor and use spark proof tools
and explosion proof equipment. Empty containers may retain product residue or vapor. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose container to heat, flame, sparks, static electricity, or other sources of ignition. Any of these actions can
potentially cause an explosion that may lead to injury.
STORAGE: Keep containers closed when not in use. Store in cool well ventilated space away from incompatible materials.
8. Exposure Controls/Personal Protection
Ingredients with Occupational Exposure Limits
Chemical Name ACGIH TLV-TWA ACGIH-TLV STEL OSHA PEL-TWA
OSHA PEL-CEILING
polyethylene wax 2 mg/m3 N.D. N.D. N.D.
titanium dioxide 10 mg/m3 N.D. 15 mg/m3 N.D.
Further Advice: MEL = Maximum Exposure Limit OES = Occupational Exposure Standard SUP = Supplier's Recommendation
Sk = Skin Sensitizer N.E. = Not Established N.D. = Not Determined
US_GHS_SDS (English)
Page 2 / 6