Installation Instructions

26
13.9 Rolling
Rolling carpet to cushion is required. Refer to Section 12.5.
13.10 Post Installation
Protection is required for double glue installations. Refer to Section 12.7.
14.0 Attached Cushion Install
14.1 Carpet Layout
Refer to Section 5.3.
14.2 Floor-Applied Adhesive Installations
Use the carpet adhesive and seam adhesive recommended by the carpet or adhesive
manufacturer.
14.2.1 Trowel Notch Size
Refer to the general minimum guidelines in Table II.
14.2.2 Open Time
Refer to Section 12.2.3.
14.3 Installation Procedures
Cut seam edges with appropriate tools based on carpet manufacturer
recommendations. Trim into material to eliminate possible height variation at the
seam. In the case of woven goods, carefully refer to the manufacturer’s
recommendation for that specific style. Seal cut edges at seams with proper seam
adhesive applied as recommended by the carpet or adhesive manufacturer. Roll
installed carpet according to manufacturer recommendations.