Installation Guide

TOOLS REQUIRED:
• Drill bit 5/32” (.156”)
• Drill (with adjustable clutch, recommended)
• Miter Saw (with metal cutting blade)
• Level
• Rubber mallet
• Tape measure
• Touch-up paint
FOR A SUCCESSFUL INSTALLATION:
• Read the instructions completely before beginning the installation.
• Plan your railing project. Sketch your project with the actual measurements of your deck or balcony complete
with post locations.
• Check local building codes to ensure compliance.
• Check carton(s) to determine part count is complete.
• After cutting rails, balusters, or posts, paint exposed metal for maximum protection against the elements.
• Installation is best accomplished with two people.
• Wear personal protection equipment; safety glasses, etc.
• Use care not to over-torque the screws. Pre-drilling is recommended.
• Provided hardware to install MoistureShield
®
Pro Aluminum Rail is for use with MoistureShield
®
Pro
Aluminum Posts. If installing to other surfaces the installer must acquire the appropriate hardware as
needed for proper installation.
866.729.2378 | WWW.MOISTURESHIELD.COM
ALUMINUM FIXED STAIR RAIL
INSTALLATION INSTRUCTIONS